Liquid glazes, engobes, lustres and golds Colorobbia Art.
... Powder glazes, powder engobes, CAV colours, oxide
Safety data sheets before using please download safety data sheets.
Notice:
We recommend for schools use of completely non-toxic liquid glazes (eg Bellissimo)
Use:
We apply glaze over bisque.
Powder glaze stirred in the water in water for 24 hours - the glaze gets completely wet and air bubbles can be released. The density of the suspension depends on the use (soaking, spraying ...) and on the porosity of the busque. This is followed by a few hours of drying. Before putting in the kiln, carefully wipe the bottom of the product. If you do not do this and the glaze touches the slab and there is a risk of the product sticking.
We recommend buying a minimum quantity (1 kg) and test the glaze.
Glaze mixing type:
the glaze is slowly poured into the water until it has a cream density. According to the experience of ceramics and glaze type, about 0.7-1.2 liters of water per 1 kg of glaze.
... Bellissimo glazes 900-BLS
Bellissimo! Glazes are bright, intense and easy to use at all levels. Suitable for workshops, studios, ceramic cafes, workshops and schools. Suitable for all types of decoration: brush, drops, sponge, hand printing. They are also an excellent vehicle for those taking their first steps in ceramic decoration.
Preparation-application-firing
Shake well before use. Dilute with water if necessary. Apply 1 to 3 coats on bisque. For brush decoration, the transparent lead-free clear glaze HC-0004-D must be applied. Applying 3 coats of the product will add brilliance, which can also be further enhanced by treatment with the clear glaze.
Firing temperature 950 ° C-1250 ° C (Orton 08-7 cone).
Excellent even at high temperatures.
Dekorovaní nebylo nikdy jednodušší!
Bellissimo glazury se mohou nanášet i přes sebe !
... Fairy Dust-HSS
The Fairy Dust series adds a sparkling effect to any ceramic project. Preparation-application-firing. Use 1-2 coats on each piece for best results. Using full coverage of the piece, Fairy Dusts do not require application of clear glaze. They can be used in combination with other series such as Bellissimo! Glaze or Engobbi (Slip). The “Dust” inside the product is very contaminating so we suggest using dedicated brushes. Fairy Dust are non-toxic, lead free and “Food Safe.” The packaging is 8 oz. (236 ml).
... Engoby-HCO
You’ll love the look and performance of Colorobbia’s Engobes! These paints can be used on both clay and bisque. Plus, only 1 to 2 coats are needed to achieve a smooth, flawless appearance. Dip in clear glaze for that smooth, glossy look, or add a matte clear glaze for a perfect matte finish! The possibilities are endless with Engobes! Superior performance and unbeatable convenience makes Colorobbia a great choice for all your painting needs. Engobes are clay based pure pigment colors that gives solid coverage on bisque, greenware, and wet clay. Engobes are great for one stroke painting. You may add water to achieve a watercolor effect or paint 1-3 coats for solid coverage.
PREPARATION-APPLICATION-FIRING
Perfect for application by brush, sponge, stamps... as well as graffito. Apply clear transparent glaze (matte or shiny) for a perfect finish. Airbrush application for professional use only. Fire piece to Cone 06
Engobes are ceramic colours offered in 56 different colours. They are clay based which give solid coverage on large surfaces and are easy to use. All engobes can be used both on greenware and bisque. Use fi ligrana for a fun raised effect on your pottery. Shake jar well and refi ll in detail bottle. Gently squeeze bottle to create design on your piece. Filigrana (HC-0610) comes in white only, but a little bit of Bellissimo can be added to change colour for fun effects. Purchase jars of fi ligrana (1 pint) and use any detail bottle you have or use Colorobbia detail bottle, which includes two size tips.
PREPARATION-APPLICATION-FIRING
Shake well before use. If necessary dilute with water. Apply 1-3 even coats to mature 04 bisque. Application by brush, sponge, sticks; perfect background for sgraffi toing.
Can be left unglazed to achieve their matte finish.
Apply transparent superclear lead free HC-0001-B by brush or HC-0004-D dipping to achieve super brilliant finish. Airbrush application for professional use only. Firing temperature 950°-1000°C (Orton cone 08-06).
... Engoby Academy / BASIC - HAC
These are quality glazes at a great price! Firings were tested on Italian white mass TBS1 for firing 1050°C Engob firings on white mass W11 (firing 1185°C) and red W10 (firing 1050°C and 1185°C) can be viewed in our shop.
Differences between Engob Colorobbia Art and Engob Academy:
While Colorobbia Art engobes can be applied to any leather, any scorched shard, even fired shard, Academy engobes are recommended to be applied to a leather /dried/ shard or scorch up to a maximum temperature of 900° C /so that the applied layer is sufficient/. While Colorobbia Art engobes remain matte up to 1250° C, Academy engobes start sintering at 1150° C (the surface begins to vitrify) and the maximum recommended temperature is therefore 1150°-1180° C. At higher temperatures, Academy engobes have a shiny surface. Transparent glazes depending on the firing temperature / for example CLA 51, CLA 92, CLA 73 ... / can be used over Academy engobes.
... Terra Bella glazes-HSC
he Terra Bella line is made up of unique colors inspired by nature. Each of these colors has a unique texture. Their appearance varies from very bright to a matte/satin finish. Preparation-application-firing. This line can be used in perfect harmony with the other Colorobbia colors to obtain more emphasized results. To obtain unique colors and effects, simply layer the color and no work of art will be the same as the previous one. Terra Bella is excellent for obtaining shiny ceramic work even at low temperatures. The series consists of 23 colors, plus 4 unique “Aventurina” colors, which are formulated to be applied over and under other colors, to enhance, change and create amazing effects. Terra Bella colors are non-toxic, available in two 4 oz. and 16 oz. sizes and “Food Save.”
... Underglazes
Underglaze colours, available in 36 colours, are highly concentrated and need to be diluted with water before use. They are specifi cally suited for bisque decoration.
After decorating, apply transparent superclear lead free HC-0004-D for dipping or HC-0001-B for brushing.
PREPARATION-APPLICATION-FIRING
Shake well before use. Add water and apply by brush or sponge.
Airbrush application for professional use only.
Firing temperature 1000°-1040°C (Orton cone 06-05).
... Underglazes sticks
Underglaze sticks are available in 18 different shades and are a perfect tool for drawing, shading, and blending directly onto mature bisqueware even with fi nger or dry brush. The decoration it is quick and easy. These products are the easiest way to a fi rst approach to ceramics.
After decorating, apply transparent superclear lead-free HC-0004-D dipping glaze.
Firing temperature 950°- 1000°C (Orton cone 08-06)
... Liquid gold and metalic lustres
Liquid gold and metallic lustres have a colloidal form and have a dark brown colour; they contain dissolved metals as a main component.
PREPARATION-APPLICATION-FIRING
The products must be diluted with thinner HTL 199 in ranges from 5% to 15%.
They are mainly applied by brush on earthenware, glass, and porcelain. Airbrush application for professional use only. This application should always be on glazed objects; thoroughly clean and should be kept moisture free.
Firing temperatures:
Glass: 500°-600°C (Orton cone 022-021)
Earthenware: 690°-700°C (Orton cone 018)
Porcelain: 750°-815°C (Orton cone 017-015)
Before fi ring, allow items to sit in a dust-free, warm room for several hours to dry
... Lead free third firing colours
Lead Free Third-fi ring colours are suitable to decorate glazed items such as earthenware or porcelain. These products are quick drying, water soluble, and they well adhere on the glazed surface.
PREPARATION-APPLICATION-FIRING
The product has a creamy consistency; use HC-0700 Medium if dilution is needed.
Prepare the solution with a knife palette or brush on a fl at surface or on a plate.
Application by brush.
Firing temperature for application:
Earthenware 690°-750°C (Orton cone 018)
Porcelain 750° - 815°C (Orton cone 017-015)
... Liquid glazes
Large variety of solid, brilliant, and matte glazes. Completely lead-free. Perfect on both white and red bisque. They can be mixed with each other to obtain different shades. Large variety of transparent, brilliant, and matte glazes. Completely lead-free. Best on white bisque. They are perfect to intensify “bas-reliefs” or engraved items.
PREPARATION-APPLICATION-FIRING
Shake well before use. If necessary dilute with water. Suitable for all kind of applications.
Airbrush application for professional use only.
Firing temperature 950°-980°C (Orton cone 08-07).
